Vertical Digital Boring Machine
Incazelo
I-Vertical Digital Honing Machine FT7 isetshenziselwa ikakhulukazi isilinda senjini eyisicefe yemoto kanye nogandaganda ukuze ihlehle. Isebenza futhi kusilinda esiyisicefe senjini engu-V, kanye nezinye izimbobo zengxenye engumshini njengomkhono wesilinda wesilinda esisodwa, uma ezinye izinto ezifanele zifakelwe.
Umyalelo wesakhiwo
Izingxenye eziyinhloko zalo mshini zimi kanje:
1) Ithebula lomsebenzi
2) Ingxenye eyisicefe
3) Indlela yokubamba isilinda
4) I-micrometer ekhethekile
5) Iphedi
6) Ukulawula umoya
7) Ukulawula ugesi
1.Ingxenye engenhla nengxenye engezansi yebhentshi yokusebenza njengoba kuboniswe engxenyeni engenhla iwukuthwala umoya ingxenye eyisicefe, ukuze kwakhiwe i-air-pad yokunyakaza kwe-longitudinal kanye ne-lateral; ingxenye engezansi isetshenziswa njengezinga lesisekelo, lapho ingxenye elindile ibekwe khona.
2.Ingxenye eyisicefe (i-Changeable-speed cutting mechanism) : Yisigaba esiwumgogodla emshinini, esakhiwe ngebha eyisicefe, i-axle eyinhloko, i-ballscrew, i-motor variable-frequency motor, i-servo motor, i-centering device, indlela yokudlulisa eyinhloko, isistimu yokuphakelayo kanye nedivayisi yokubamba ephethe umoya.
2.1 Ibha eyisicefe : Ingahanjiswa phansi naphezulu engxenyeni eyisicefe ukuze ibone ukuphakelwa kwengxenye, kanye nokunyakaziswa kwengxenye phezulu naphansi ngesandla; futhi ekugcineni kwayo engezansi, i-ekseli eyinhloko eshintshayo f80, i-ekseli eyinhloko f52, i-ekseli eyinhloko f38 (insiza ekhethekile) noma i-axle eyinhloko f120 (insiza ekhethekile) ifakiwe; Engxenyeni engezansi ye-axle eyinhloko, kufakwe isethi yama-rack amane anenombolo, indawo ye-rack ngayinye emgodini oyisikwele we-axle rack eyinhloko ayibekwa ngokungenasisekelo kodwa iqondaniswe, okungukuthi, inombolo eku-rack iqondaniswe nenombolo ezungeze imbobo yesikwele (embuthanweni wangaphandle) ku-axle rack enkulu yokubeka kahle.
2.2 Uhlelo lokuphakelayo lwakhiwe nge-ballscrew, i-servo motor kanye ne-electronic handwheel (njengoba kukhonjisiwe ku-Drawing 1), ngaleyo ndlela ngokujikisa isondo lesandla le-elekthronikhi ukuze ubone ukunyakaza kokuya phezulu naphansi kwebha eyisicefe (ukujika ngakunye ngo-0.5mm, isikali ngasinye esingu-0.005mm, 0.005×100=0.5mm), kanye nangokukhetha ukunyakaza kuya phansi ukuya phezulu ukunyakaza phezulu naphansi kwebha eyisicefe.
2.3 Injini eyinhloko ye-variable-frequency motor ishayela i-ekseli eyinhloko yebha eyisicefe ngebhande lamazinyo e-synchronous (950-5M-25) ukuze ibone isicefe.
2.4 Idivayisi ephakathi nendawo: I-Brushless DC motor ifakwe ngaphezu kwebhokisi lokudlulisela eliyinhloko (njengoba kukhonjisiwe ku-Drawing 1), oshayela indawo yokubeka endaweni engezansi ekugcineni kwe-asi eyinhloko ngebhande lamazinyo e-synchronous (420-5M-9) ukuze kubonakale ukuma okuzenzakalelayo.
2.5 Ithuluzi lokubamba eliphethe umoya: Isethi yesilinda esithwala umoya, isilinda, amapuleti okubamba aphezulu naphansi afakwa ngaphansi kwengxenye eyisicefe ukuze kubonakale ukuma; lapho uhamba, ingxenye enesithukuthezi inesithukuthezi emoyeni ngaphezu kwendawo engaphezulu yetafula lomsebenzi, futhi ngemva kokuqeda ukuma futhi lapho isidina, ingxenye eyisicefe ikhiyiwe futhi ibanjwe.
3.Indlela yokubamba : Izindlela ezimbili zokubamba ezisheshayo ezine-eccentric cam zifakwe ngokulandelana kwesokudla kanye nohlangothi lwesobunxele lwetafula lomsebenzi eliphezulu, futhi lapho ingxenye elindile ibekwe endaweni yetafula eliphansi letafula lomsebenzi, ingabanjwa kanyekanye futhi ngokufanayo ibanjwe phansi.
4.I-micrometer ekhethekile: Lo mshini ufakwe ithuluzi lokulinganisa elikhethekile lokulinganisa isisiki esiyisicefe, kuhlu lwe-f50～f100, f80～f160, f120～f180 (insiza ekhethekile) kanye ne-f35～f85 (insiza ekhethekile).
5.Ama-pads: Umshini ufakwe izinhlobo ezintathu zamaphedi anikezwa umsebenzisi ukuze azikhethe ngokuya ngokuphakama okuhlukene noma ukuma kwengxenye elindile, ngokulandelana: Amaphedi angakwesokudla nangakwesokunxele (ubude obufanayo bubhanqiwe) 610 × 70 × 60, amaphedi (ubude obufanayo bubhanqiwe) 550 × 100 × 70, amaphedi aphindwe kabili (Isesekeli esikhethekile).
6.Idivayisi yokubamba i-Accessory (njengoba kuboniswe ku-Drawing 1): Amabhawodi amabili okubamba izinsiza afakwe ezinhlangothini ezimbili zengxenye eyisicefe, uma kwenzeka ukupakisha, ukudiliva kanye nesimo esikhethekile, alungisa ingxenye eyisicefe; noma esimweni sokusebenza esibucayi (ukubamba ngaphansi kwevolumu enkulu yokusika), noma kudingekile ukucubungula ngaphansi kokuphakelwa komoya okuphazamisekile noma umfutho womoya ophansi, isiguquli somoya-kagesi ngaphakathi kwesilawuli somthombo womoya (bheka Umdwebo 3) singavalwa, bese sibamba futhi sikhiya, ukusika.
Izinsiza ezijwayelekile:I-Spindle Φ 50，I-Spindle Φ 80 ，Ukusekelwa okuhambisanayo A ，Ukwesekwa okuhambisanayo B, Abasiki ababhoring.
Izinsiza ozikhethela:I-spindle Φ 38，Spindle Φ 120，Isilinda esintantayo sohlobo lwe-V,Isibambi sebhulokhi.
Imininingwane Eyinhloko
| Imodeli | FT7 |
| Ububanzi Boring | 39-180 mm |
| Ubukhulu. Ukujula Okuyisicefe | 380mm |
| Isivinini se-Spindle | 50-1000rpm, engenasinyathelo |
| Isivinini Sokudla se-Spindle | 15-60mm/min, engenasinyathelo |
| Spindle Rapid Rising | 100-960mm/min, engenasinyathelo |
| I-Main Motor | Amandla angu-1.1kw |
| 4-isinyathelo esiyisisekelo imvamisa 50Hz | |
| Isivinini esivumelanayo 1500r/min | |
| Okuphakelayo Motor | 0.4kw |
| Ukubeka Motor | 0.15kw |
| Ingcindezi Yokusebenza | 0.6≤P≤1 Mpa |
| I-Centering Range ye-Centering Rack | 39-54 mm |
| 53-82 mm | |
| 81-155 mm | |
| 130-200 mm | |
| I-spindle 38mm | 39-53mm (uma uthanda) |
| I-spindle 52mm | 53-82mm( insiza ejwayelekile) |
| I-spindle 80mm | 81-155mm(insiza evamile) |
| I-spindle 120mm | 121-180mm(ongakukhetha) |
| I-Dimension Ephelele | 1400x930x2095mm |
| Isisindo Somshini | 1350kg |
