I-WRC26
Incazelo
●Uhlelo alunazinhlelo futhi lusebenza kahle ngokushesha. Lungakwazi ukubona ngokuzenzakalelayo ukwakheka kwehabhu, luqoqe idatha, lukhiqize izinhlelo zokucubungula, futhi lujikeleze ngokuzenzakalelayo ukusika.
●Okuthuthukileubuhlakani bungahlangabezana nezimo ezihlukahlukene zamahabhu emakethe, futhi isistimu ithuthukiswa ngokuqhubekayo, futhi ayikho i-engeli efile yokutholwa nokucutshungulwa, njengezinyathelo zonqenqema oluphakeme, izinyathelo ezikabili, namahabhu amise okwesipesheli angacutshungulwa.
●Uhlelo lunomsebenzi wesevisi ekude, ongathuthukisa futhi ubuyekeze umshini womsebenzisi, ukufundisa nokuqeqeshwa, isevisi yangemuva kokuthengisa neminye imisebenzi.
| I-ITM | I-UNIT | I-WRC26 | |
| Umshini umthamo wokucubungula | UMax.shwibeka phezu kombhede | mm | 700 |
| Ukuhamba kwe-eksisi ye-X/Z | mm | 360/550 | |
| Isiphakeli se-eksisi ye-X/Z | mm/min | 1000/1000 | |
| Ibanga lomsebenzi wamasondo | I-diameter yokubamba isondo | intshi | 26 |
| Ibanga lobude besondo | mm | 700 | |
| Chuck | Usayizi we-Chuck | mm | 260 |
| Inani lemihlathi ye-chuck | 3/4/6 | ||
| Isivinini se-spindle | Ijubane le-Lathe | rpm/min | 50-1000 |
| Sika isivinini somsebenzi wesondo | 300-800 | ||
| Amathuluzi okuthola | I-Laser/TP300 Probe | ||
| Umzila wesitimela osuka | Isitimela esiqinile | ||
| Isakhiwo se-Lathe | Evundlile | ||
| Uhlelo | I-6Ta-E/YZCNC(Uhlelo oluzenzakalelayo, ukusebenza kwesikrini esithintwayo 17 isikrini se-LCD didplay | ||
| Ithuluzi cattier | Inombolo | 4 | |
| Ukunemba | Ukunemba kokumisa | mm | 0.01 |
| Ukuphindaphinda Ukumisa ukunemba | mm | 0.01 | |
| Ukunemba kokubekwa kwepositoning yenkampani yenethiwekhi yethuluzi | mm | ±0.07 | |
| Amandla emoto | Injini eyinhloko | Kw | 3 |
| I-XZ feed torgue | N/m | 6/10 | |
| Ukupholisa | Ukupholisa amanzi/Ukupholisa komoya/Ukupholisa isifutho somfutho ophakeme | ||
| Amandla kagesi | I-220v/3 Isigaba esisodwa 220V/3 Isigaba esingu-380V | ||
| Usayizi womshini | mm | 1800×1550×1800 | |
| Isisindo somshini | t | 1.1 | |
