I-WRC26
Inkcazo
● Inkqubo ikhululekile kucwangciso kwaye inokusebenza ngokukhawuleza.Iyakwazi ukubona ngokuzenzekelayo imilo yehabhu, iqokelele idatha, ivelise iinkqubo zokucwangcisa, kwaye ijikeleze ngokuzenzekelayo ukusika.
●Ukuqhubela phambiliubukrelekrele bunokudibana neemilo ezahlukeneyo zeehabhu kwimarike, kwaye inkqubo iphuculwa ngokuqhubekayo, kwaye akukho angle efileyo yokuchongwa kunye nokucutshungulwa, njengamanyathelo aphezulu, amanyathelo aphindwe kabini, kunye nee-hubs ezinokwakheka okukhethekileyo zinokusetyenzwa.
●Inkqubo inomsebenzi wenkonzo ekude, enokuthi iphucule kwaye ihlaziye umatshini womsebenzisi, ukufundisa kunye noqeqesho, inkonzo emva kokuthengisa kunye neminye imisebenzi.
| I-ITM | IYUNITHI | I-WRC26 | |
| Umatshini amandla okusebenza | UMax.ujingi phezu kwebhedi | mm | 700 |
| Uhambo oluhamba phambili lwe-X/Z | mm | 360/550 | |
| X/Z i-axis feed | mm/umz | 1000/1000 | |
| Uluhlu lomsebenzi wamavili | Ivili elibambe idiameter | intshi | 26 |
| Ubude bevili | mm | 700 | |
| Chuck | Ubungakanani beChuck | mm | 260 |
| Inani lemihlathi ye-chuck | 3/4/6 | ||
| Isantya se-spindle | Isantya seLathe | rpm/min | 50-1000 |
| Sika isantya somsebenzi wevili | 300-800 | ||
| Izixhobo zokufumanisa | Laser/TP300 Probe | ||
| Isikhokhelo sikaloliwe ukusuka | Uloliwe onzima | ||
| Ubume beLathe | Ukuthe tye | ||
| Inkqubo | I-6Ta-E/YZCNC(Inkqubo ezenzekelayo,ukusebenza kwesikrini sokuchukumisa i-17 isikrini se-LCD senziwe | ||
| Isixhobo catier | Inani | 4 | |
| Ukuchaneka | Positoning ukuchaneka | mm | 0.01 |
| Ukuphindaphinda Ukubeka ukuchaneka | mm | 0.01 | |
| Tool carrier repeatability positoning ukuchaneka | mm | ±0.07 | |
| Amandla emoto | Injini engundoqo | Kw | 3 |
| XZ feed torgue | N/m | 6/10 | |
| Ukupholisa | Ukupholisa amanzi/Ukupholisa umoya/Ukupholisa ngoxinzelelo oluphezulu lwesitshizi | ||
| I-Voltage | Single 220v / 3 Isigaba 220V / 3 Isigaba 380V | ||
| Ubungakanani bomatshini | mm | 1800×1550×1800 | |
| Ubunzima bomatshini | t | 1.1 | |
